The need to enter wind speed manually makes the Fury AB not quite as user-friendly as it might first appear. This is the mode I used most frequently, and I found it to be super accurate. Users face directly into the wind, press the “wind bearing capture” button, enter the wind speed, and go from there. In Wind Bearing Capture Mode, users can capture the exact direction of the wind, and the Fury calculates windage adjustments based on the direction of the target relative to the wind. Range is measured by pressing “Measure” and wind direction is captured by pressing the button with the four dots at the top left corner of this photo. This mode is designed for quick but less precise wind calculations.
So, if your target is at 12 o’clock, and a 10mph wind is coming from 2 o’clock, you’d enter a 7(ish) mph wind coming from the 3 o’clock position. Users enter the wind speed relative to those directions.
VORTEX FURY HD 5000 FULL
In Full Crosswind Mode, the Fury assumes the wind is coming from either the full 3 o’clock or 9 o’clock positions. This can be done using one of two modes: Full Crosswind Mode or Wind Bearing Capture Mode. If you don’t have a Kestrel, you’ll have to input wind information yourself. If you have a Kestrel, that’s the simplest way to go.
VORTEX FURY HD 5000 BLUETOOTH
The Fury can be connected via Bluetooth to a Kestrel, which will provide additional environmental information, including wind. The Fury includes on-board sensors that measure temperature, pressure, humidity, and elevation, and it automatically factors those variables when it produces the shot solution. Here, the binos are recommending adjusting the reticle 2.3 milliradians up and 0.1 to the left. The built-in bullet library has hundreds of factory cartridge options to choose from, so unless you’re using handloads, it’s likely your favorite cartridge is already there. Users construct firearm profiles by inputting data like bullet speed, ballistic coefficient, scope height, and zero range. In addition, users can swap out firearm profiles via the app. The binos can provide those adjustments for three different firearm profiles (A, B, or C), which is more than enough for any given hunt or range trip. Once the binos have a range, they provide windage and holdover adjustments based on whatever firearm profile is currently selected. Range can be shown in both meters and yards. I’ve found that this feature works flawlessly. The range appears in yards in the bottom portion of the heads-up display, and the units can be changed to meters. Users take a range by placing the reticle on an object and pressing the “Measure” button on the top of the binos. The Fury’s settings and features are mostly operated via the Vortex Fury HD app, including firearm profiles, environmental information, and target parameters.Īgain, the Fury offers a near-infinite number of features, but here are a few I’ve found helpful (or otherwise).īesides magnification, instant ranging is the Fury’s most useful feature. The setup process is relatively painless with the help of these videos, though you might struggle if you’re not comfortable using a smart phone.
I won’t reinvent the wheel and go through the entire setup, but here’s the first video in the Vortex series: The Fury’s glass is excellent.īut you don’t drop 2K on these binos to ignore their electronic functionality. Like the previous iteration of the Fury, the Fury AB features a tough, scratch-resistant exterior and fog-proofing over a wide range of temperatures. The glass is clear and anti-reflective, and I found the resolution and contrast to be top-notch even at long distances. The Fury binos can be used as traditional binoculars, and in that capacity, they’re excellent. Click here to check out the Fury HB 5000 AB.
0 kommentar(er)
